- DTN Headline News
Russ' Vintage Iron
Monday, February 24, 2020 12:56PM CST
By Russ Quinn
DTN Staff Reporter

Last month, I received a Vintage Iron story and photo for the first time in quite some time. If you remember, James Piotter of Sleepy Eye, Minnesota, told us about his sharp-looking International 1456 tractor.

This month, we have another Vintage Iron story, and it's also about an International tractor. This one comes to us from north of the border.

Here is the story, sent in by Robert Robinson of Parkhill, Ontario, Canada:

"In the early 1950s our first backhoe was a Ford 8N with a Sherman hoe and a Henry front loader. Then we got an International 300 with a Wagner hoe and loader, which was new in 1956, and it was a great improvement.

"We paid $5,500.00 (Canadian dollars) for it as a demonstrator unit. We got paid $5.50 per hour for it with the operator. We used it on our farm drainage business and had it in Middlesex County much of the time, digging anchor post holes for the fences when roads were being widened and paved.

"The backhoe was purchased from CISCO Equipment, who sold contractor pumps, forklifts, etc. at this time. IHC did not sell these themselves, so maybe CISCO Equipment was a Wagner dealer. A few years later, IHC started making their own backhoes and loaders.

"Loader backhoes made great improvements in the 1950s. Case brought their first 530 hoe out in 1958, which was a much stronger hoe and loader.

"Wagner and then IHC made great improvements, also soon utilizing loader backhoe which were made by early '60s. Massey-Ferguson had a good backhoe loader as well. I don't know when John Deere got into this market as well.

"We ran it steady for 10 years; by then, new hoe prices had gotten to $10,000.00 and we were only getting $6.00 per hour, so this didn't pay as good. Many owner operators quit and went to work as an operator for a contractor.

"By the 1970s, backhoes got up to $16,000.00 new and we got $15.00 an hour for the work so this worked OK. Then prices got weaker so new hoes didn't pay as well.

"By the 1980s, we paid a 40% premium to the U.S. dollar. We in Canada are affected by the exchange rate, the Canadian dollar to U.S. dollar. So the price of a machine might increase by a third, and not much increase in machine rates were seen.

"By 2000, we paid $90,000.00 for a new Case 4WD tractor with cab and Extendahoe at a rate of $80.00 per hour. Now we are paying $160,000.00 Canadian dollars for a new hoe and only getting $100.00 per hour.

"The International 300 was used up to 1975 as a backhoe. The hoe was time consuming to remove so we just took the hoe off, leaving the controls and stabilizer.

"The 300 was used on the farm as a loader until 2010. The unit was disassembled and restored with new tires, hydraulic hoses and a wiring kit in 2018.

"Times change and are all the same."

Robert Robinson

Parkhill, Ontario, Canada

**

My thanks go out to Robert for the interesting story and photo of his 1956 International 300 with Wagner backhoe and loader. That is one of the more interesting rigs I have seen -- not that I know much about tractor-mounted backhoes.

And I will be honest: I don't know if I have seen too many International 300 tractors, at least the standard or utility versions. According to tractordata.com, the International Harvester 300 was built from 1955 to 1956.

The model tested 38.32 horsepower at the drawbar, and the belt tested 42.68 horsepower. The original price for a 300 was $2,900 in 1956.

The total number of 300s built was 59,928 during the two-year production run. The site said a variant was a row-crop Farmall 300, which I have seen before.

I suppose the region you live in also probably dictates what version of tractors are more common. We don't see many standard or wheat-land tractors here in eastern Nebraska. A majority of the vintage iron tractors you see in our area are row-crop tractors.

On my family's small farm, we have a mid-1950s International 400 tractor, with a wide front end and a dual loader. The 400 is not anything fancy. It's our backup loader, but it does come in handy to have two tractors with loaders in the fall when we bring round hay bales home some 25 miles away from the hayfields.

That is two months in a row we have had red Vintage Iron stories. It has been several years since we have had a Vintage Iron story, let alone two in a row!

Let's keep the streak going. Who is going to send me something for March?

Russ Quinn can be reached at russ.quinn@dtn.com

Follow him on Twitter @RussQuinnDTN

(AG/ SK)


blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Tuesday, February 25, 2020 10:08AM CST
Friday, February 21, 2020 11:39AM CST
Friday, February 14, 2020 11:12AM CST
Technically Speaking
Editorial Staff
Monday, February 24, 2020 9:14AM CST
Tuesday, February 18, 2020 8:53AM CST
Monday, February 10, 2020 8:24AM CST
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Friday, February 21, 2020 8:08AM CST
Wednesday, February 19, 2020 11:04AM CST
Tuesday, February 18, 2020 10:59AM CST
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Tuesday, February 25, 2020 2:29PM CST
Tuesday, February 25, 2020 11:19AM CST
Friday, February 21, 2020 11:36AM CST
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Wednesday, February 19, 2020 12:08PM CST
Tuesday, February 11, 2020 1:24PM CST
Friday, January 17, 2020 4:55PM CST
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Tuesday, February 25, 2020 2:55PM CST
Friday, February 21, 2020 2:16PM CST
Thursday, February 20, 2020 12:43PM CST
DTN Production Blog
Pam Smith
Crops Technology Editor
Thursday, February 13, 2020 11:14AM CST
Friday, January 31, 2020 2:40PM CST
Thursday, January 9, 2020 10:55AM CST
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Monday, February 24, 2020 2:43PM CST
Monday, February 17, 2020 10:48PM CST
Monday, February 10, 2020 4:00PM CST
South America Calling
Editorial Staff
Tuesday, February 11, 2020 5:13PM CST
Tuesday, February 4, 2020 5:18PM CST
Thursday, January 30, 2020 2:52PM CST
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Thursday, February 20, 2020 1:35PM CST
Monday, February 10, 2020 8:59AM CST
Monday, February 3, 2020 9:51AM CST
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Friday, February 14, 2020 2:50PM CST
Thursday, February 6, 2020 4:06PM CST
Monday, January 27, 2020 3:59PM CST
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Tuesday, February 25, 2020 3:17PM CST
Monday, February 24, 2020 3:18PM CST
Friday, February 21, 2020 3:21PM CST
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Tuesday, December 31, 2019 10:39AM CST
Friday, November 22, 2019 5:37PM CST
Monday, November 11, 2019 2:26PM CST
 
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN